Mechanical Engineering Courses
The courses of all three bachelor’s programmes. Search by code, by name or by any word in the description.
54 courses Clear the search
DMRIE electives may also be chosen from the courses whose codes begin 012053XX 012054XX 012063XX 012064XX 012083XX 012304XX 012113XX
-
01204111
Computers and Programming
3(2-3-6) creditsTaught by another department: see its description in the curriculum document (ME, PDF)
-
01205201
Introduction to Electrical Engineering
3(3-0-6) creditsTaught by another department: see its description in the curriculum document (ME, PDF)
-
01205202
Electrical Engineering Laboratory I
1(0-3-2) creditsTaught by another department: see its description in the curriculum document (ME, PDF)
-
01205301
Digital Circuits and Microcontrollers
3(3-0-6) creditsTaught by another department: see its description in the curriculum document (EMME, PDF)
-
01205302
Digital Circuits and Microcontrollers Laboratory
1(0-3-2) creditsTaught by another department: see its description in the curriculum document (EMME, PDF)
-
01208111
Engineering Drawing
3(2-3-6) creditsLettering techniques, applied geometry drawing, orthographic drawing, pictorial drawing, dimensioning and tolerancing, sectional view drawing, auxiliary views, development, sketching techniques, detail and assembly drawings, introduction to computer-aided drawing.
-
01208112
Mechanical Engineering Drawing
3(2-3-6) credits2D and 3D drawing. Principles of mechanical engineering drawing. Working drawing. Technology of drawing and design by using computer.
-
01208113
Workshop in Computer Aided Design and Drafting for Mechanical Design
1(0-3-2) creditsPrerequisite: 01208112 Mechanical Engineering Drawing
Part modeling. Sheet metal part. Weldment part. Surface. Standard parts. Assembly. Mechanical assembly. Part properties. Working drawings. Dimensioning and tolerancing. Geometric dimensioning and tolerancing.
-
01208201
Basic Principles of Engineering Mechanics
3(3-0-6) creditsPrerequisite: 01417167 Engineering Mathematics I
Force analysis, equilibrium, fluid statics, kinematics and kinetics of particles and rigid bodies, Newton’s second law of motion, work and energy, impulse and momentum.
-
01208211
Workshop in Computer Aided Design and Drafting for Building Systems
1(0-3-2) creditsPrerequisite: 01208112 Mechanical Engineering Drawing
Principles of design and drafting concepts using computer for building system works. Use of drafting programs. Computer-aided-drafting standards. Electronic data management. Three-dimensional modeling for building system works.
-
01208221
Engineering Mechanics I
3(3-0-6) creditsPrerequisite: 01417167 Engineering Mathematics I
Force analysis, equilibrium, application of equilibrium equations to frames and machines, centroid, theorem of Pappus, beams, shear and bending moment diagrams, cable, dry friction, wedges, screws and belts, virtual work, stability of equilibrium, area moment of inertia, introduction to dynamics.
-
01208222
Engineering Mechanics II
3(3-0-6) creditsPrerequisite: 01208221 Engineering Mechanics I
Mass moment of inertia, mechanics of particle and rigid body in plane motion, equation of motion, principle of impulse and momentum, principle of work and energy, impact, fundamental of space motion.
-
01208223
Mechanics of Materials
3(3-0-6) creditsPrerequisite: 01208221 Engineering Mechanics I
Equilibrium of deformable body, concept of stresses and strains, stresses and strains relationship, normal stress and strain in axially loaded member, shearing stress and strain in circular shaft subjected to torsion, bending and shearing stresses in beams, deflection of beams, stresses under combined loading, Mohr’s circle, buckling of columns.
-
01208241
Thermodynamics
3(3-0-6) creditsPrerequisite: 01417167 Engineering Mathematics I
Properties of pure substances, work and heat, ideal gas, first and second laws of thermodynamics, simple steam power plant and refrigeration cycle, entropy, basic heat transfer and energy conversion.
-
01208242
Fluid Mechanics
3(3-0-6) creditsPrerequisite: 01417168 Engineering Mathematics II
Fluid properties, fluid statics, continuity equation, momentum equation, energy equation, dynamics of incompressible and inviscid fluid flow, dimensional analysis and similitude, incompressible and viscous flow, flow in pipes, drag force and lift force.
-
01208271
Mathematical Applications in Mechanical Engineering
3(2-3-6) creditsPrerequisite: 01417168 Engineering Mathematics II
Mathematical models and numerical solutions for mechanical engineering. Systems of linear equations. Curve fitting. First-order differential equations. Systems of linear differential equations. Laplace transform. Fourier-series methods and partial differential equations.
-
01208281
Workshop Practice
1(0-3-2) creditsPractices in the use of measurement devices, hand tools, power tools, materials and accessories in mechanical works, welding, machining, wood works, piping system, electrical and electronics works, and safety.
-
01208302
Introduction to Fluid Mechanics and Fluid Machinery
3(3-0-6) creditsPrerequisite: 01417168 Engineering Mathematics II
Fluid properties, fluid statics, dynamics of incompressible and inviscid flow, dynamics of incompressible and viscous flow, continuity equation, linear momentum equation, energy equation, flow in pipes, characteristics, performance and application of fan blower compressors and pumps.
-
01208311
Machine Design
3(3-0-6) creditsPrerequisite: 01208223 Mechanics of Materials
Fundamental of mechanical design. Properties of materials. Theories of failure. Design of simple machine elements. Rivets. Welding. Screw fasteners. Keys and pins. Shafts. Springs. Gears. Power screws. Couplings. Bearings. Brakes. Clutches. Belts. Chains. Use of computer in machine design.
-
01208321
Mechanics of Machinery
3(3-0-6) creditsPrerequisite: 01208222 Engineering Mechanics II
Mechanisms and analysis of displacements. Velocity and acceleration of their members. Analysis of forces and motions in machines. Balancing of rotation and reciprocation masses. Use of computer in motion and force analysis of mechanics of machinery.
-
01208322
Mechanical Vibrations
3(3-0-6) creditsPrerequisite: 01208271 Mathematical Applications in Mechanical Engineering
Mathematical modeling of mechanical, electrical, and hydraulic systems. Free vibration of systems with one degree of freedom and simulation. Forced harmonic vibration. Simulation and applications – rotating unbalance, support motion vibration, vibration isolation, vibration measurement. Transient vibration, Runge-Kutta method, and simulation. Vibration of systems with multi-degrees of freedom. Lagrange’s equation.
-
01208331
Automotive Technology
3(3-0-6) creditsAutomotive body and frame, engine operation, lubrication systems, cooling systems, fuel delivery systems, ignition systems, starting and charging systems, power train systems, suspension systems, braking, and steering systems.
-
01208341
Thermal System Design
3(3-0-6) creditsPrerequisite: 01208241 Thermodynamics
Power cycles and refrigeration cycles. Applications of first and second law of thermodynamics to thermal systems. Workable design of thermal systems. Equation fittings. Modeling thermal equipment. System simulation and optimization. Economic analysis.
-
01208342
Power Plant Engineering
3(3-0-6) creditsPrerequisite: 01208241 Thermodynamics
Principles of power plants. Load calculation. Steam power plant. Gas turbine and combined cycle power plant. Fuel and combustion. Steam generator. Combustion equipment and regulation. Steam turbine. Condensate and feed water systems. Circulating water system. Nuclear power plant. Hydro power plant. Control and instrumentation. Power plant safety. Power plant economics and environmental impacts.
-
01208351
Heat Transfer
3(3-0-6) creditsPrerequisite: 01208271 Mathematical Applications in Mechanical Engineering
Principles of heat transfer by conduction, convection and radiation, steady and unsteady state condition in one, two or three dimensional heat transfer, heat exchanger, boiling and condensation.
-
01208352
Refrigeration
3(3-0-6) creditsPrerequisite: 01208241 Thermodynamics and 01208242 Fluid Mechanics
Applications of refrigeration. Thermodynamic principles. Cooling load design for refrigeration systems. Refrigerant and their properties. Vapor compression cycle. Coefficient of performance. Compressor analysis. Evaporator design. Condenser design. Computer aided design for refrigeration. Case studies.
-
01208353
Air Conditioning and Fire Protection
3(3-0-6) creditsPrerequisite: 01208241 Thermodynamics and 01208242 Fluid Mechanics
Applications of air conditioning. Cooling load design for air conditioning systems. Computer aided engineering for cooling load of air-conditioning systems. Principle of psychrometric analysis. Sensible heat analysis. Latent heat analysis. Room sensible heat ratio. Cooling coil & Process line analysis. Computer aided design for psychrometric analysis. Applications of fire protection systems. Equipment and conceptual design for fire protection. Case studies.
-
01208371
Automatic Control
3(3-0-6) creditsPrerequisite: 01208271 Mathematical Applications in Mechanical Engineering
System dynamic modeling. Transfer function and block diagram. On-off control and PID control. Solution of ordinary differential equation using Laplace transformation. Time variable response. Analysis of system stability by root-locus method. Frequency response and data display. Design and improvement of control system efficiency. State-space method. Robotic control. Internet of things and artificial intelligence. System simulation.
-
01208381
Mechanical Engineering Laboratory I
1(0-3-2) creditsPrerequisite: 01208201 Basic Principles of Engineering Mechanics or 01208221 Engineering Mechanics I
Experimental works in the areas of engineering mechanics, solid mechanics, thermodynamics, engineering materials and fluid mechanics.
-
01208382
Mechanical Engineering Laboratory II
1(0-3-2) creditsPrerequisite: 01208241 Thermodynamics
Experimental works in the areas of heat transfer, power plant engineering, automatic control, air conditioning and fluid machinery.
-
01208383
Mechanical Workshop Practice
1(0-3-2) creditsPrerequisite: 01208281 Workshop Practice
Skill building practices in the use of machines, power tools, hand tools, various measurement devices. Process planning, tools and machines selection, real part fabrication and mechanical assembly fitting practices are carried out through term project assignment.
-
01208411
Mechanical Design Processes
3(3-0-6) creditsMechanical design, designers, design teams, design process, planning for design, concept generation, concept evaluation, product generation, product evaluation.
-
01208412
Product Development
3(3-0-6) creditsPrerequisite: 01208311 Machine Design
Steps in product development process including needs identification, specification, conceptual design, detailed design, prototyping and evaluation, design for manufacture and assembly, production, cost, intellectual property.
-
01208413
CAD/CAM for Mechanical Engineering
3(3-0-6) creditsHardware and software for CAD/CAM, part modeling and assembly, detail drawing, geometric dimensioning and tolerancing, bill of materials, CAM for turning and milling.
-
01208414
CNC Machine and Programming
3(3-0-6) creditsType of CNC machines, manufacturing process and planning, metal cutting technology, CNC programming for turning and milling machines.
-
01208415
Entrepreneurship for Mechanical Engineering
3(3-0-6) creditsCreative thinking, product development, market opportunity, legal aspects in entrepreneurship, entrepreneurial financial, marketing and human resource management, financial accounting for management.
-
01208416
Project Management for Mechanical Engineering
3(3-0-6) creditsIntroduction to engineering project management. Introduction to fund raising for engineering business. Introduction to teamworking and human resource management. Introduction to procurement procedure. Engineering project management tools. Leadership for engineers. Engineering project execution. Running business projects. Decision making and crisis management.
-
01208417
Engineering Business and Management Communication
3(3-0-6) creditsEngineering business management. Communication skills. Communication resources for engineering business and management. Oral presentation skills. Body language skills. Email and letter writing. Technical report writing. Engineering business negotiation skills. Communicating public relations. Marketing communications. Communication for leadership.
-
01208421
Introduction to Finite Element Methods
3(3-0-6) creditsConcept of finite element method, integral formulations and variational methods, formulation of finite element methods for analysis of linear static solids and structures, heat transfer in solids, and fluid flow.
-
01208422
Introduction to Computational Fluid Dynamics
3(3-0-6) creditsConcept of computational fluid dynamics, transport equations of flow, finite volume method, application of computational fluid dynamics software for laminar and turbulent flows in a pipe, flow over obstacles, flow and heat transfer in an air-conditioned room, heat transfer in an electronic equipment, modeling of fire in a room.
-
01208423
Biomechanics Engineering
3(3-0-6) creditsMechanics and dynamics of body motion, muscle, joints and heart, analysis of force, stress and strain of bone, muscle and tissue, applications of biomechanics engineering to medical equipment and instrument.
-
01208424
Application of Finite Element Analysis for Composite Materials
3(2-3-6) creditsPrerequisite: 01208223 Mechanics of Materials
Fiber-reinforced polymer-matrix composites. Mechanics of orthotropic materials. Classical lamination theory. Thermal stress, strength of laminates. Geometric modeling. Meshing. Composite modeling. Boundary conditions. Linear static analysis. Structural instability.
-
01208426
Fluid Machinery
3(3-0-6) creditsPrerequisite: 01208242 Fluid Mechanics
Theory and design of turbomachinery, characteristics, performance and application of fans, blowers, compressors, and pumps, hydraulic and pneumatic systems.
-
01208427
Construction Machinery
3(3-0-6) creditsPrerequisite: 01208321 Mechanics of Machinery
Basic machine components, tractors and related equipment, excavating equipment, scrapers, trucks, grading and compacting equipment, compressors and drills, selection of construction equipment, planning and management.
-
01208428
Equipment Management
3(3-0-6) creditsPrinciples of equipment management, planning, control and evaluation of equipment utilization, maintenance and repair, spare parts control.
-
01208431
Computer-aided Automotive Design
3(2-3-6) creditsComputer sketching, 3-dimensional geometrical object construction, solid part design, surface object design, volume object construction, part assembly, 2-dimensional working drawing.
-
01208432
Automotive Vehicle Dynamics
3(3-0-6) creditsPrerequisite: 01208222 Engineering Mechanics II
Standard units, vehicle resistances, traction force, acceleration of vehicles, braking, engine and vehicle performance, gear ratio selection, vehicle handling characteristics.
-
01208433
Alternative Energy for Vehicles
3(3-0-6) creditsPrerequisite: 01208331 Automotive Technology
Automotive engines, automotive natural gas system, liquefied petroleum gas system, safety standard, hybrid systems, electric vehicles, automotive batteries electric motors, fuel cells, fuel cell supporting systems, flexible fuel engines.
-
01208434
Internal Combustion Engines
3(3-0-6) creditsPrerequisite: 01208241 Thermodynamics
Engine types and operation. Engine design and operating parameters. Fuels and combustion. Ideal engine operating cycles. Gas exchange processes. Combustion in spark-ignition and compression-ignition engines. Pollutant formation. Emission standards and control. Advanced technologies for internal combustion engines.
-
01208435
Control of Air Pollution from Automobiles
3(3-0-6) creditsPrerequisite: 01208241 Thermodynamics and 01208331 Automotive Technology
Air pollution from gasoline and diesel engines. Standards and regulations for air pollution control from automobiles. Emissions measurements and test procedures. Technologies for emissions control from automobiles. Alternative energy sources for emission control.
-
01208436
Battery System Engineering
3(3-0-6) creditsMaterials for energy conversion and storage. Thermodynamics and transport processes of electrochemical cell. Battery testing. Battery modelling. Battery degradation. Battery management systems. Thermal management systems. Control of battery systems. Battery pack manufacturing.
-
01208437
Vehicle System Integration
3(3-0-6) creditsPrerequisite: 01208331 Automotive Technology and 01208371 Automatic Control
V-model development, system modeling and simulation, model-based design, software-in-the-loop, hardware-in-the-loop, system verification and validation, electronic control unit, controller area network.
-
01208438
Automotive Manufacturing Technology
3(1-4-4) creditsAutomotive body production, metal, plastic and rubber parts manufacturing process, field trip required.
-
01208441
Combustion Engineering
3(3-0-6) creditsPrerequisite: 01208241 Thermodynamics
Combustion and thermochemistry. Fuel types and properties. Introduction to chemical kinetics. Ignition. Flame types. Industrial combustion applications. Control of pollution and environmental effects.
-
01208442
Energy Management and Economics
3(3-0-6) creditsPrerequisite: 01208241 Thermodynamics and 01205201 Introduction to Electrical Engineering
Energy situation and concepts of energy conservation. Energy audits. Calculation of the overall thermal transfer value and the roof thermal transfer value. Energy conservation in thermal and electrical system. Energy management in buildings and industry. Energy economics analysis and energy usage environment.
-
01208443
Gas Engineering
3(3-0-6) creditsProperties of gases and distillation system, gas separation and process, gas compression, gas measurement, calculation of gas flow in pipe.
-
01208444
Introduction to Solar Engineering
3(3-0-6) creditsPrerequisite: 01208351 Heat Transfer
The sun’s position calculation, solar radiation calculation, solar collector and energy storage, feasible study in engineering and economics, energy conversion, system design and applications of solar energy.
-
01208445
Gas Turbine Engines
3(3-0-6) creditsPrerequisite: 01208241 Thermodynamics
History and thermodynamics of gas turbine engines. Gas dynamics. Shaft-power gas turbine engines. Gas turbine engines for aircraft propulsion. Compressor. Ignition system. Combustion chamber and nozzle. Turbine and cooling. Component matching. Starting system and lubrication system. Environmental impacts from gas turbine engines.
-
01208446
Introduction to Heat Transfer Enhancement
3(3-0-6) creditsPrerequisite: 01208351 Heat Transfer
Convective heat transfer. Basic of heat transfer enhancement. Heat transfer enhancement technique. Surface extension. Use of porous media. Use of twist plate. Modification of pipe surface. Design of piping heat transfer enhancement. Analysis of piping heat transfer enhancement.
-
01208447
Gas Dynamics
3(3-0-6) creditsPrerequisite: 01208241 Thermodynamics and 01208242 Fluid Mechanics
Compressible flow, isentropic flow, normal shock wave, flow with friction, flow with heat transfer, generalized one, two and three dimensional flow, oblique shock waves.
-
01208448
Introduction to Renewable Energy
3(3-0-6) creditsSources and types of renewable energy, energy conversion processes and storage methods, equipments and implementations in energy conversion processes, evaluation of renewable energy sources.
-
01208449
Energy Audits
3(2-3-6) creditsPrerequisite: 01208241 Thermodynamics
Analysis and measurement of performance for heating, ventilating, and air conditioning systems, refrigeration systems, lighting and hot water systems in commercial and industrial buildings, measurement techniques for energy audits, energy conservation.
-
01208451
Industrial Refrigeration
3(3-0-6) creditsPrerequisite: 01208352 Refrigeration
Refrigerant, lubricating oil, expansion device, electrical control, monitoring systems, refrigerant piping and vessel design, multi-pressure refrigeration process, cold storage , food preservation by cooling, cryogenic, thermal-electric, steam jet refrigeration system, air cycle and vortex tube, design of refrigeration system and installation.
-
01208452
Applications of Air Conditioning and Refrigeration Systems
3(3-0-6) creditsPrerequisite: 01208352 Refrigeration and 01208353 Air Conditioning and Fire Protection
Ventilation principle. Fan selection and specification. Laws and regulations. Standards for ventilation. Performance based design. Fan performance analysis. Air distribution and duct system design. Clean room application. Water chiller system. Selection of water pump. Control valve and accessories in piping system. Water piping design. Computer aided design. Case studies.
-
01208453
Piping Design for Buildings and Industrial Factories
3(3-0-6) creditsPrerequisite: 01208242 Fluid Mechanics
Design standard. Laws and regulations related to piping design. Piping system. Water pump. Control valve and accessories. Installation. Design of sanitary system. Design of hot water system. Design of steam piping system. Design of water-based fire protection piping system.
-
01208454
Industrial Ventilation
3(3-0-6) creditsPrerequisite: 01208242 Fluid Mechanics
Principle of ventilation, dilution ventilation, ventilation for heat control, hood design, specific operations, design procedure, make-up and recirculated air, construction specifications, testing of ventilation systems, air cleaning devices.
-
01208455
Control Elements and Applications in Air Conditioning Systems
3(3-0-6) creditsPrerequisite: 01208353 Air Conditioning and Fire Protection
Function of control variable, control purpose, control methods, control of liquid flow, air flow, temperature, humidity, control elements in air conditioning system. Study in use of instruments, installation practice, operation and maintenance, compilation into written reports.
-
01208461
Principles of Fire Protection
3(3-0-6) creditsPrinciples of fire protection, fire classifications and selection of extinguishers, human behavior in fires, safety to life from fire, principles of passive and active fire protection, fundamental of fire suppression systems, building fire safety design, fire safety planning, fire safety inspection, fire hazard analysis.
-
01208462
Building Codes and Fire Codes
3(3-0-6) creditsBuilding codes and fire codes, analysis of the purpose and enforcement of building codes, analysis of international and local fire codes, regulations and local laws relating to building codes, development of building codes and fire codes in Thailand.
-
01208463
Theory and Design of Automatic Fire Suppression Systems
3(3-0-6) creditsTheory and approval standards of automatic fire suppression systems, analysis and selection of automatic sprinkler systems and their components, design of automatic sprinkler systems, gaseous fire suppression systems, foam and dry chemical fire suppression systems.
-
01208464
Fire Alarm and Smoke Control System
3(3-0-6) creditsPrinciples of fire alarm system and smoke and fire detectors, analysis of fire alarm circuits and components, standards and design of fire alarm and smoke control systems, principles and design of smoke control and air pressurized system, fire model for smoke control system.
-
01208465
Risk Analysis in Fire Protection Engineering
3(3-0-6) creditsTheory and concept of risk analysis in fire protection engineering, risk identification and measurement, risk management by insurance method, risk tools, risk engineering methods, preparation for loss adjustments, risk management analysis and planning.
-
01208466
Introduction to Fire Phenomena
3(3-0-6) creditsCombustion in natural fires heat transfer in fire ignition flame spread and burning rate fire plume and ceiling jet combustion products in fire enclosure fire phenomena.
-
01208471
Engineering Measurements
3(3-0-6) creditsPrerequisite: 01208271 Mathematical Applications in Mechanical Engineering
Measuring of engineering quantity in electrical signal for control, study and display, measurement of motion, pressure, temperature, strain, fluid flow, forces and torques, dynamic response of measuring devices.
-
01208472
Design of Mechanical System Control
3(3-0-6) creditsPrerequisite: 01208371 Automatic Control
Dynamic model of mechanical systems, electronic control system design, electric motor control system, control and design of PLC, introduction to control using microprocessor.
-
01208473
Electronic Application in Mechanical Engineering
3(3-0-6) creditsPrerequisite: 01205201 Introduction to Electrical Engineering
Electrical instruments in mechanical systems, characteristics diodes, LED, and transistors, fundamental concepts of filters, time comparators and digital circuits, application and design us operational amplifiers, integrated circuits, relays, transdue interfacing and servomechanicsm, principles of robotic system.
-
01208474
Fluid Power
3(3-0-6) creditsPrerequisite: 01208242 Fluid Mechanics
Fluid power systems, basic theory and symbols in fluid power systems, hydraulic systems and circuit design, pneumatic systems and circuit design, trouble shooting and maintenance in fluid power systems.
-
01208475
System Dynamics Simulation
3(3-0-6) creditsPrerequisite: 01208271 Mathematical Applications in Mechanical Engineering
Definition and classification of dynamic systems and components, state-variable and input-output models, mathematical modeling of system components of electrical, mechanical, fluid, and thermal, modeling of multi-domain systems, nonlinear systems and linear representations of nonlinear components, simulation techniques using software package.
-
01208476
Machine Learning for Mechanical Engineering
3(2-3-6) creditsPrerequisite: 01204111 Computers and Programming
Background and concept of machine learning. Fundamental of python programing. Machine leaning algorithm library for python programing. Neural networks for machine learning. Applications of machine learning in mechanical engineering.
-
01208477
Introduction to Industrial Robots
3(3-0-6) creditsPrerequisite: 01208321 Mechanics of Machinery
Introduction to industrial robots, robot reference frames, forwards manipulator kinematics, inverse manipulator kinematics, Jacobian of manipulators, manipulator dynamics and introduction to robot controls, trajectory generation, mechanism design, introduction to hybrid force and position control.
-
01208478
Vibration Monitoring and Analysis
3(3-0-6) creditsPrerequisite: 01208322 Mechanical Vibrations
Predictive maintenance, mechanical vibration, Fourier series and fast Fourier transform, vibration measurement and instrumentation, symptoms of vibration signals, diagnosis, setup of alarm band.
-
01208479
Engineering Acoustics
3(3-0-6) creditsIntroduction to acoustics, Introduction to the propagation of acoustic disturbances, one-dimensional acoustic wave motion, waves in three dimensions, sound in enclosures, sound radiation, multipole sources, sound reflection, transmission refraction and attenuation, laboratory sessions.
-
01208490
Co-operative Education
6 creditsOn the job training as a temporary employee in order to get experience from the assignment.
-
01208495
Mechanical Engineering Project Preparation
1(0-3-2) creditsPreparation of project proposal, literature review and progress report.
-
01208496
Selected Topics in Mechanical Engineering
1-3 creditsSelected topics in mechanical engineering at the bachelor’s degree level. Topics are subject to change each semester.
-
01208497
Seminar
1 creditsPresentation and discussion on current interesting topics in mechanical engineering at the bachelor's degree level.
-
01208498
Special Problems
1-3 creditsStudy and research in mechanical engineering at the bachelor’s degree level and compiled into written reports.
-
01208499
Mechanical Engineering Projects
2(0-6-3) creditsPrerequisite: 01208495 Mechanical Engineering Project Preparation
Projects of practical interest in various fields of mechanical engineering.
-
01211151
Statics and Strength of Materials
3(3-0-6) creditsForce systems. Resultant. Equilibrium. Friction. Principle of virtual work and stability. Introduction to dynamics. Stresses and strains relationship. Stresses in beams. Shear force and bending moment diagrams. Deflection of beams. Torsion. Buckling of columns. Mohr’s circle and combined stresses. Failure criterion.
-
01211211
Design Engineering and Design Technology
3(2-3-6) creditsSolid modeling for mechanical part. Reverse engineering and surface modeling. Sheet metal design. Pneumatics and hydraulics drawing. Motion simulation. Mechanical parts structure analysis. Computer-aided engineering. Mechanical and electrical drafting. Wire harness design and electrical routing.
-
01211221
Hydraulics and Pneumatics Systems
3(2-3-6) creditsComponents of pneumatic and hydraulic systems. Design of pneumatic and hydraulic circuits. Design of electro pneumatic circuits. Electro pneumatics system control using PLC. Applications of pneumatic and hydraulic system in mechatronics.
-
01211222
Mechatronics Engineering
3(2-3-6) creditsElectric motor. Hydraulics system and pneumatics system. Mechanical drives. Transducers. Sensors. Microcontroller. Fundamental PLC. Control system. Implementations of sensor and actuator systems. Mechanical devices and electrical circuits interface. Navigational sensors.
-
01211231
Computer-Controlled Machines
3(3-0-6) creditsConventional machine for turning, drilling, tapping. Milling. Grinding. Cutting. Punching. Boring and bending. Safety precaution. Machine installation and site preparation. Lubrication and maintenance. Cutting tool application and technology. Computer numerical control machines and programming. Introduction to computer-controlled machine.
-
01211232
Production Systems Management
3(3-0-6) creditsIntroduction to manufacturing planning and control system. Just-in-time/Lean manufacturing. Demand management. Forecasting. Inventory control. Master production scheduling. Final assembly scheduling. Capacity management. Rough-cut capacity planning. Material requirements planning. Capacity requirements planning. Manufacturing resource planning. Production activity control. Scheduling and sequencing. System monitoring and data analytics.
-
01211233
Computer-aided Manufacturing and CNC Machine Technology
3(2-3-6) creditsCNC turning and milling machines. Machine components and operation. Cutting tool and tool holder standards. Safety precaution. Health safety and environment. Turning and milling operations. Feed, speed and depth of cut determination for selected cutting tool and materials. G and M codes programming. Modelling and simulation by using computer-aided manufacturing software package.
-
01211241
Industrial Energy Management and Engineering Economics
3(3-0-6) creditsEnergy situation and concepts of energy conservation. Energy audit techniques. Calculation of overall thermal transfer value and roof thermal transfer value. Energy conservation in thermal and electrical systems. Energy management in buildings and industry. Energy economics analysis. Energy usage environment.
-
01211261
Fundamentals of Thermodynamics and Fluid Mechanics
3(3-0-6) creditsIntroduction to thermodynamics. Basic principles and definitions. Properties and states of pure substances. Work and heat. First Law of Thermodynamics. Closed Systems. Open Systems. Introduction to Fluid Mechanics. Fluid properties. Fluid statics. Law of conservation of mass. Momentum and energy. Bernoulli’s equation. Flux field. Static and incompressible flow.
-
01211271
Industrial Artificial Intelligence and IoT
3(2-3-6) creditsIntroduction to artificial intelligence and IoT. Design and development approaches. Hardware and software. Programming and algorithm development. Communication protocol. Cloud system connection. Device monitoring and control. Data collection and analysis. Probabilistic models. Integration and applications of artificial intelligence and IoT in manufacturing industry.
-
01211312
Design and Control of Production Machinery Components
3(3-0-6) creditsStrength of materials. Design of axial loading member and shaft. Mechanism and operation of mechanisms. Theories of failure. Design of electrical and pneumatic control systems. Design of mechanism with on/off control systems. Design of beams, bearings, springs, gear trains, pulley, belt and chain. Industrial linear and angular motion system design. Design of mechanisms with feedback control systems. Case study and design project.
-
01211313
Automatic Machine Design
3(3-0-6) creditsMechanical, electrical, and fluid power elements in automatic machine. Integrated design of mechanical, electrical, and fluid power systems. Assembly and disassembly design. Comparisons and considerations for purchasing.
-
01211314
Application of Computer in Engineering Design
3(2-3-6) creditsPrerequisite: 01211151 Statics and Strength of Materials
Computer-aided engineering. Finite element analysis. Geometric modeling. Material modeling. Structural stress analysis. Failure criteria. Vibration and buckling problems. Nonlinear problems. Computational fluid dynamics. Aerodynamic force. Heat transfer. Validation of results.
-
01211315
Manufacturing Facility Design
3(3-0-6) creditsFacilities planning and design. Problems, factors, and methods of location selection. Types of plant layout. Process and workstation design. Analysis of requirement for machines, equipment and manpower. Material handling. Material handling equipment. Time and motion study. Flow and activity relationship analysis. Material flow and area requirement analysis. Features of mass production and assembly line layout. Line balancing techniques. Computerized layout.
-
01211321
Kinematics and Dynamics of Robots
3(2-3-6) creditsPrerequisite: 01208222 Engineering Mechanics II
Acceleration and position analysis. Velocity kinematics. Force and torque relationships. Homogeneous coordinates for kinematics and dynamics. Forces and moment balance. Dynamic modeling of joints and linkages. Euler-Lagrange and Newton-Euler formations. Dynamics algorithms. Robotics joint. Cartesian and force controls. Performance analysis of robotics, and balancing of mechanical systems. Industrial robot practice.
-
01211322
Geometric Measurement and Instrumentations
3(2-3-6) creditsIndustrial instrument characteristics and applications. Instruments for length, depth, height, surface, roughness, flatness, parallelism, straightness and roundness. Force and torque measurement in machine tools. Temperature and pressure measurements in injection molding process. Calibration process. Laser instrument. Non-contact measurement. CNC coordinate measuring machine. Measuring standard. Control environment for precision measurement.
-
01211323
Industrial Automation Control System
3(2-3-6) creditsBasic principle of automation system for electrical-mechanical manufacturing engineering. Programmable logic controller. Basic PLC programming. Basic PLC instructions. Timer and counter instructions. Program control instructions. Process controller design. Analog sensors and actuators. Analog control. PLC network. Human-machine interface. Analysis and design of automation system.
-
01211324
Robotics Integration and Automation System
3(2-3-6) creditsPrinciples of industrial automation system. Principles of SCADA systems. SCADA programming to monitor and control the PLC-based industrial processes. Principles of industrial robot. Robotics integration and automation system for modern manufacturing. Smart factory. Guidance for safety system design for robot work cell.
-
01211325
Vibration Analysis and Condition Based Maintenance
3(2-3-6) creditsBasic theory of mechanical vibration. Systems with one degree of freedom. Free and forced vibration. Method of equivalent system. Multi-degree of freedom system. Effects of vibration on mechanical equipment. Vibration measuring instrument. Vibration diagnostic. Vibration analysis and control. Realtime data monitoring and vibration analysis. Condition based maintenance.
-
01211334
Robotics Engineering and Information System
3(2-3-6) creditsIntroduction to robotics. Industrial robot operating system (ROS). Architectural components of the ROS. Computer programming for ROS to control robot. Commands and instruction sets. Display and simulation. Calling tools and libraries. Creating packets. Interfacing between ROS and sensors/actuators. Algorithm for data processing. Kinematics analysis. Manipulator kinematics. Joints and links. Homogeneous transformations. Forward and inverse kinematics. Position analysis. Dynamic analysis. Velocity and Acceleration analysis. Force and torque relationships. Force and moment balance. Trajectory planning.
-
01211361
Mold and Die
3(2-3-6) creditsMachine for mold and die. Limitation and structure of machines. Basic operation of injection machine and pressing machine. Components for mold and die. Standard mold bases. Injection mold and die design. Finishing processes. Selection of materials and their properties. Metal forming processes, forging, extrusion, drawing and powder metallurgy. Machine and tooling for forming processes. Operation safety and fundamental of fire protection. Heat in injection and compression mold. Modeling and analysis of fluids and heat flow in mold design.
-
01211362
Refrigeration and Heat transfer
3(3-0-6) creditsPrerequisite: 01211261 Fundamentals of Thermodynamics and Fluid Mechanics
Basic knowledge of refrigeration and coefficient of performance. Modified vapor compression. Refrigeration cycles, system components analysis. Refrigerant and their properties. Evaporative cooling and cooling towers. Absorption refrigeration, calculation of cooling load of refrigeration systems. Principles of heat transfer by conduction0. Convection and radiation. Steady and unsteady state condition in one dimensional heat transfer. Heat convection, heat exchanger.
-
01211363
Industrial power systems
3(3-0-6) creditsPrerequisite: 01211261 Fundamentals of Thermodynamics and Fluid Mechanics
Basic concepts of thermodynamics. Applications of first and second law of thermodynamics with thermal systems. Workable design of heat engines, heat pumps, steam turbine, gas turbine, condensers and reciprocating engines. Economic analysis. Equation fittings. System simulation and optimized design. Energy conversion principles. Fuels and combustion analysis. Steam power plant. Gas turbine power plant. Combined cycle and cogeneration. Hydro power plant. Environmental impacts.
-
01211364
Introduction to Air Conditioning and Refrigeration
3(3-0-6) creditsFundamental of Air conditioning. Air condition system in factory, electric vehicle, train and electric multiple units. Introduction to cooling system and refrigeration technology in factory. Fundamental of industrial cooling system and refrigeration and its components. Principle of design, set up, diagnostic, and maintenances.
-
01211365
Thermal System and Power Generation Technology
3(3-0-6) creditsConcept and design processes of thermal systems. Application of the first and second Law of Thermodynamics for the analysis of thermal systems. Thermal devices mathematical modeling. System simulation. Economic analysis. Fundamental of power plant engineering. Types of very small power producer and its components. Solar system in building design. Design of electrical system in machine, factory and building.
-
01211371
Industrial Dynamics System and Control
3(2-3-6) creditsDynamics modelling of mechanical and electromechanical systems. Classical control theory. Classical control practice. Controller design. Introduction to digital control and modern control. Control principles and practical design of microcontroller-based control systems, CPLD and FPGA, PLC, and industrial motion control cards.
-
01211372
Industrial Device Interface and Communication Protocols
3(2-3-6) creditsIndustrial communication standards and protocols. Wired and wireless Parallel-Serial communication. RS232/422/485 standards. Industrial ethernet and TCP/IP. Ethernet IP. Modbus. CANBUS/CANOpen. DeviceNet. AS-I Interface. Profibus. Fieldbus. HART Communication Protocol. Pelco-D and Pelco-P.
-
01211373
Machine Learning and Programming for Industry
3(2-3-6) creditsMachine Learning in industrial. Neural network. Hardware and software. Perceptron. Supervised and unsupervised learning. Reinforcement learning. Loss functions. Back propagation. Binary and multiclass classification. Hyperparameters tuning. Convolutional neural networks. Transfer learning. Data pipelining. Recurrent neural networks. Sequence models. Natural language processing. Embedded device deployment.
-
01211397
Seminar
1 creditsPresentation and discussion on current interesting topics in Electrical-Mechanical Manufacturing engineering at the bachelor’s degree level.
-
01211472
Deep Learning for Manufacturing Industry
3(2-3-6) creditsIntroduction to deep learning and neural networks for manufacturing industry. Deep sequence modelling. Deep computer vision. Deep generative modelling. Deep reinforcement learning. Limitations and new frontiers. Evidential deep learning. Bias and fairness. Case studies of deep learning in electrical-mechanical manufacturing engineering fields.
-
01211490
Co-operative Education
9 creditsOn the job training as a temporary employee in order to get experiences from the assignment for Electrical–Mechanical Manufacturing Engineering.
-
01211494
Body of knowledge from Oversea University
1-12 creditsKnowledge in Electrical-Mechanical Manufacturing Engineering the bachelor’s degree level taken in Oversea University. Credit equivalent according to Kasetsart University regulation.
-
01211495
Electrical–Mechanical Manufacturing Engineering Projects Preparation
1(0-3-2) creditsResearch methods in Electrical- Mechanical Manufacturing Engineering. Project proposal writing. Literature review. Research report writing. Utilization of instrumentation for research. Application of software in instrumental control and data analysis. Media creation for research presentation.
-
01211496
Selected Topics in Electrical-Mechanical Manufacturing Engineering
1-3 creditsSelected topics in Electrical-Mechanical Manufacturing Engineering at the bachelor’s degree level. Topics are subject to change each semester.
-
01211498
Special Problems
1-3 creditsStudy and research in Electrical-Mechanical Manufacturing Engineering at the bachelor’s degree level and complied into a written report.
-
01211499
Electrical-Mechanical Manufacturing Engineering Project
2(0-6-3) creditsPrerequisite: 01211495 Electrical–Mechanical Manufacturing Engineering Projects Preparation
Project of practical interest in various fields of Electrical-Mechanical Manufacturing Engineering.
-
01213201
Materials and Manufacturing Processes
3(3-0-6) creditsTaught by another department: see its description in the curriculum document (ME, PDF)
-
01234397
Seminar
1 creditsPresentation and discussion on current interesting topics in digital manufacturing and robotics integration engineering at the bachelor’s degree level.
-
01234490
Co-operative Education
9 creditsOn the job training as a temporary employee in order to get experiences from the assignment for digital manufacturing and robotics integration engineering.
-
01234494
Body of knowledge from Oversea University
1-12 creditsKnowledge in digital manufacturing and robotics integration engineering the bachelor’s degree level taken in oversea university. Credit equivalent according to Kasetsart University regulation.
-
01234495
Digital Manufacturing and Robotics Integration Engineering Projects Preparation
1(0-3-2) creditsResearch methods in digital manufacturing and robotics integration engineering. Project proposal writing. Literature review. Research report writing. Utilization of instrumentation for research. Application of software in instrumental control and data analysis. Media creation for research presentation.
-
01234496
Selected Topics in Digital Manufacturing and Robotics Integration Engineering
1-3 creditsSelected topics in digital manufacturing and robotics integration engineering at the bachelor’s degree level. Topics are subject to change each semester.
-
01234498
Special Problems
1-3 creditsStudy and research in digital manufacturing and robotics integration engineering at the bachelor’s degree level and complied into a written report.
-
01234499
Digital Manufacturing and Robotics Integration Engineering Project
2(0-6-3) creditsPrerequisite: 01234495 Digital Manufacturing and Robotics Integration Engineering Projects Preparation
Project of practical interest in various fields of digital manufacturing and robotics integration engineering.
-
01403114
Laboratory in Fundamentals of General Chemistry
1(0-3-2) creditsTaught by another department: see its description in the curriculum document (ME, PDF)
-
01403117
Fundamentals of General Chemistry
3(3-0-6) creditsTaught by another department: see its description in the curriculum document (ME, PDF)
-
01417167
Engineering Mathematics I
3(3-0-6) creditsTaught by another department: see its description in the curriculum document (ME, PDF)
-
01417168
Engineering Mathematics II
3(3-0-6) creditsTaught by another department: see its description in the curriculum document (ME, PDF)
-
01420111
General Physics I
3(3-0-6) creditsTaught by another department: see its description in the curriculum document (ME, PDF)
-
01420113
Laboratory in Physics I
1(0-3-2) creditsTaught by another department: see its description in the curriculum document (ME, PDF)
-
01999111
Knowledge of the Land
2(2-0-4) creditsTaught by another department: see its description in the curriculum document (ME, PDF)
No course matches. Try a shorter word, or “All” programmes.
From each programme’s curriculum document; where they differ, the document is what counts: ME (PDF) · EMME (PDF) · DMRIE (PDF)